Pace Reset Procedures

The global reset can be carried out on the following receivers, it will restore all program information to the factory defaults:

Put the receiver into normal viewing mode, then press the following keys in sequence within 4 to 5 seconds.

Receiver Reset Procedure Confirmation
SS3000
SS6000
Set-up, 1*, 2*, 3*, Both store keys together,
Channel Up, Channel Down.
 
SS6060
SS9000
SS9200
Set-up, P_, 2, 3, Store,
Channel Up, Channel Down.
The timer LED will flash
once to confirm the reset
was successful.
PSR/PRD800/900
MRD950/960
Menu, P_, Store, Right Arrow,
Left Arrow.
The characters -E2 will
be displayed.
MRD920 Select a D2MAC channel on the receiver,
then follow the procedure for PSR800 etc.
If reset of the MAC is not required, but
reset of the PAL section is, select a non
MAC channel.
The 16:9 LED will
flash once.

The global reset can be carried out on the following receivers but the program information will remain unchanged. To recover pre-set channels, a download procedure would need to be performed. This must be from the same model and specification receiver.

Receiver Reset Procedure Confirmation
PSR/PRD800/900 Plus
MRD950/960 Plus
MSS100
MSS200
MSS261
MSS290
MSS300
MSS500 Series
MSS1000 Series
Prima
Apollo
Menu, 0, Store,
Right Arrow, Left Arrow.
If the unit has a vacuum
fluorescent display,
RESTORE E2 will be
shown.
If the unit has an LED
display, E2 will be
shown.

If the receiver is a PSR/PRD800/900 Plus, and the above procedure does not work, use the P-/-- key instead of the 0 key.

Return to Satellite Index.